UK-SSGTI
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Not running

Go down

Not running Empty Not running

Post  swiftos 14/03/08, 09:23 am

Ive got a j reg swift shell i brought with no engine. I have now fitted the engine and wen you go to start it it runs for a few seconds then the live cuts out to the injectors and the engine stops running. The rev counter doesnt work either.
Any ideas on what this could be?
swiftos
swiftos

Posts : 36
Join date : 2008-03-14
Location : Wales

Back to top Go down

Not running Empty Re: Not running

Post  IanJ 14/03/08, 09:35 am

Altanator ?? i no when my altanator had gone the rev counter didnt work properly and used to cut out run a multi metre across see what ur getting should be about 14v
IanJ
IanJ

Posts : 142
Join date : 2008-03-09
Age : 32
Location : Shrewsbury

Character sheet
first car: Suzuki Swift GSI

Back to top Go down

Not running Empty Re: Not running

Post  swiftos 14/03/08, 09:43 am

Alternator wouldnt cut the injectors of though would it.
swiftos
swiftos

Posts : 36
Join date : 2008-03-14
Location : Wales

Back to top Go down

Not running Empty Re: Not running

Post  IanJ 14/03/08, 01:31 pm

Well its all electronic not really sure m8
IanJ
IanJ

Posts : 142
Join date : 2008-03-09
Age : 32
Location : Shrewsbury

Character sheet
first car: Suzuki Swift GSI

Back to top Go down

Not running Empty Re: Not running

Post  polley 15/03/08, 12:04 am

do you loose spark as well? What code comes up think you said ECT code?

polley

Posts : 22
Join date : 2008-03-13
Location : Hereford

Back to top Go down

Not running Empty Re: Not running

Post  swiftos 15/03/08, 10:38 am

Code 14 comes up but only after its started and cut out.
swiftos
swiftos

Posts : 36
Join date : 2008-03-14
Location : Wales

Back to top Go down

Not running Empty Re: Not running

Post  cultusgzo 21/03/08, 08:20 am

check out if you have any disconnected ground wire. i had a similar problem when i did the conversion from SOHC to DOHC GTi.

cheers

tim

cultusgzo

Posts : 3
Join date : 2008-03-05

Back to top Go down

Not running Empty Re: Not running

Post  swiftos 26/03/08, 09:35 pm

Ive tried disconecting the alternator. No diferance and all the ground wires are there. I have even changed the loom now still not working.

Someone please help all i want is it running now.
swiftos
swiftos

Posts : 36
Join date : 2008-03-14
Location : Wales

Back to top Go down

Not running Empty NOT RUNNING

Post  BCY5119 25/07/09, 12:49 am

you can check water temperature sensor, the code 14 diagnosis is water temperature sensor, check the wiyer connect or disconect,

BCY5119

Posts : 2
Join date : 2009-07-19

Back to top Go down

Not running Empty Re: Not running

Post  dominator 25/07/09, 12:15 pm

have a look at the maf sensor aswell
that happened when i fitted my new engine, it turned out that one of the wires had come loose in the coupling

gary

dominator

Posts : 1298
Join date : 2008-03-16
Age : 41
Location : bournemouth

Character sheet
first car: renult 5 ts (1.7!)

Back to top Go down

Not running Empty Re: Not running

Post  STEVEGTI 25/07/09, 03:44 pm

coolent temp sensor is part of the group that control the injectors without it in theory it would not run or not run properly if it was reading too high it would run lean if too low a tempriture the car would run rich however if it is not working atall the ecu may go into cut off aka limp mode

steve

do you have a suzuki manual step by step everything in there its idiot proof
STEVEGTI
STEVEGTI
Admin

Posts : 1835
Join date : 2008-03-02
Age : 32
Location : london

Character sheet
first car: suzuki swift gti

http://www.uk-ssgti.com

Back to top Go down

Not running Empty Re: Not running

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum