UK-SSGTI
Would you like to react to this message? Create an account in a few clicks or log in to continue.

need this part

Go down

need this part Empty need this part

Post  robinsonj1 on 03/02/10, 10:48 pm

need this part because my mot in dus on monday and i have lost it
need it asap ,the bit that goes on the dizzy- the cap (not the brace)
cash waiting
thank you

https://i.servimg.com/u/f68/14/28/89/65/dsc00513.jpg
pm me

also
i know the lower bolt you have to tighten on the dizzy once adjusted goes into the head
where does the upper one go into
in to the above part im after?????


Back to top
robinsonj1
robinsonj1

Posts : 156
Join date : 2009-06-09
Location : manchester

Back to top Go down

need this part Empty Re: need this part

Post  Miniswift on 04/02/10, 10:10 am

Hi,

Part you are after.... iirc, they are in line bored item. So if you get one, it might not work perfectly.
Anyway, I might have one so I will let you know.

Cheers
Atchi

Miniswift

Posts : 484
Join date : 2008-03-13
Age : 46
Location : Newton Hall, Durham

Back to top Go down

need this part Empty Re: need this part

Post  STEVEGTI on 04/02/10, 11:57 am

o know the cam carriers are and they are not interchangable im not sure about the dizy one you might be lucky you will know as soon as you put it on


steve

_________________
N/A THE EXPENSIVE WAY TO GO SLOW IF YOU WANT TO PLAY YOU HAVE TO PAY


THERES TWO WAYS TO DO THINGS MY WAY OR THE WRONG WAY Cool
STEVEGTI
STEVEGTI
Admin

Posts : 1818
Join date : 2008-03-02
Age : 32
Location : london

Character sheet
first car: suzuki swift gti

http://www.uk-ssgti.com

Back to top Go down

need this part Empty do need it

Post  robinsonj1 on 04/02/10, 06:29 pm

this is everything i need!!!!!
just the dizzy cap/cover with the hole for the upper dizzy flange bolt
need it asap
seen ma mates 1.3 gls an it looked similar but wasnt sure
reckon the gls sohc cap would fit???
robinsonj1
robinsonj1

Posts : 156
Join date : 2009-06-09
Location : manchester

Back to top Go down

need this part Empty Re: need this part

Post  STEVEGTI on 04/02/10, 07:13 pm

its not a case of weather it will fit if it is line bored as soon as you put another one on and start it metal will start to wear off of it and into your oil [NOT GOOD BYE BYE ENGINE ]


steve

_________________
N/A THE EXPENSIVE WAY TO GO SLOW IF YOU WANT TO PLAY YOU HAVE TO PAY


THERES TWO WAYS TO DO THINGS MY WAY OR THE WRONG WAY Cool
STEVEGTI
STEVEGTI
Admin

Posts : 1818
Join date : 2008-03-02
Age : 32
Location : london

Character sheet
first car: suzuki swift gti

http://www.uk-ssgti.com

Back to top Go down

need this part Empty Re: need this part

Post  robinsonj1 on 04/02/10, 07:17 pm

well wot am i supposed to do?????
how do u go about it
im sure i used one of ma other phase 2 on ma phase 1
suzuki want daft money for one
robinsonj1
robinsonj1

Posts : 156
Join date : 2009-06-09
Location : manchester

Back to top Go down

need this part Empty Re: need this part

Post  STEVEGTI on 04/02/10, 07:23 pm

ill have a look to see if i have a spare but if you put it on and the inlet cam/dizy is very hard to turn you know its wrong and i would suggest getting it line bored at a engineering shop


steve

_________________
N/A THE EXPENSIVE WAY TO GO SLOW IF YOU WANT TO PLAY YOU HAVE TO PAY


THERES TWO WAYS TO DO THINGS MY WAY OR THE WRONG WAY Cool
STEVEGTI
STEVEGTI
Admin

Posts : 1818
Join date : 2008-03-02
Age : 32
Location : london

Character sheet
first car: suzuki swift gti

http://www.uk-ssgti.com

Back to top Go down

need this part Empty cap

Post  robinsonj1 on 04/02/10, 07:40 pm

the head where the 2 dowlings are
or the actual cap cover???
i need this part asap as mot is due next week
this part is holding me up lol
cheers
robinsonj1
robinsonj1

Posts : 156
Join date : 2009-06-09
Location : manchester

Back to top Go down

need this part Empty Re: need this part

Post  STEVEGTI on 04/02/10, 07:47 pm

a line bore bores the carrier and the head to perfect round circle


steve

_________________
N/A THE EXPENSIVE WAY TO GO SLOW IF YOU WANT TO PLAY YOU HAVE TO PAY


THERES TWO WAYS TO DO THINGS MY WAY OR THE WRONG WAY Cool
STEVEGTI
STEVEGTI
Admin

Posts : 1818
Join date : 2008-03-02
Age : 32
Location : london

Character sheet
first car: suzuki swift gti

http://www.uk-ssgti.com

Back to top Go down

need this part Empty Re: need this part

Post  robinsonj1 on 04/02/10, 07:50 pm

arnt that what the little metal dowlings are for which the 2 screws go into
they make a perfect circle in the head?
robinsonj1
robinsonj1

Posts : 156
Join date : 2009-06-09
Location : manchester

Back to top Go down

need this part Empty Re: need this part

Post  STEVEGTI on 04/02/10, 07:57 pm

yes aswell there line bored and cross drilled to each head


steve

_________________
N/A THE EXPENSIVE WAY TO GO SLOW IF YOU WANT TO PLAY YOU HAVE TO PAY


THERES TWO WAYS TO DO THINGS MY WAY OR THE WRONG WAY Cool
STEVEGTI
STEVEGTI
Admin

Posts : 1818
Join date : 2008-03-02
Age : 32
Location : london

Character sheet
first car: suzuki swift gti

http://www.uk-ssgti.com

Back to top Go down

need this part Empty Re: need this part

Post  Miniswift on 04/02/10, 08:43 pm

Hi,

I got everything else but not what you are looking for.
G13B heads is cast aluminium and it will run steel camshafts with out bearing.
To do this, a cylinder head will be in-line bored to make sure it will run straight as well as perfectly round bores. Guess what, dizzy is driven by camshaft, so it need to be straight as well..

Good luck.
Atchi

Miniswift

Posts : 484
Join date : 2008-03-13
Age : 46
Location : Newton Hall, Durham

Back to top Go down

need this part Empty help

Post  robinsonj1 on 04/02/10, 09:45 pm

so what bits do i take off to an enginerring shop or what not?????

the head has just been skimmed and put on and everything assemblled
cant take it off again as i had to pay a mechanic to sort it all out, just this little part to sort out and ma full rebuild is complete
robinsonj1
robinsonj1

Posts : 156
Join date : 2009-06-09
Location : manchester

Back to top Go down

need this part Empty Re: need this part

Post  Miniswift on 04/02/10, 11:05 pm

Hi,
First of all, you will need to get hold of the part you need.
You will then need to take off your cylinder head to engineering shop to find out if it is off centre or not. But then again, this part will be just holding dizzy and sealing oil with o-ring. I would suggest do everything once you get hold of the part. You might get lucky!

Like I said.
Good luck.

Miniswift

Posts : 484
Join date : 2008-03-13
Age : 46
Location : Newton Hall, Durham

Back to top Go down

need this part Empty Re: need this part

Post  dominator on 04/02/10, 11:09 pm

i think he will get very lucky, thats if he can find the part
i know it was all mass produced but there would have been tolerances when these were bored at the factory so if it is out, i doubt it would be by much

gary

_________________
Have a look, you know you want to!!
Swift. http://www.flickr.com/photos/11473969@N02/  
Evo. http://m.flickr.com/#/photos/100754123@N04/

dominator

Posts : 1260
Join date : 2008-03-16
Age : 41
Location : bournemouth

Character sheet
first car: renult 5 ts (1.7!)

Back to top Go down

need this part Empty Re: need this part

Post  Miniswift on 04/02/10, 11:43 pm

Hi Gary,

What I mean by good luck is this...
You need to find someone with a lot of cylinder head parts.
Without this part, cylinder head is useless unless you are going distributor less using different ECU. Do you know many people with spare cylinder head?
I know one guy has 5 engines but he is keeping all of them.....

This is why I said good luck. I have all other spares including camshafts and so on!

Cheers
Atchi

Miniswift

Posts : 484
Join date : 2008-03-13
Age : 46
Location : Newton Hall, Durham

Back to top Go down

need this part Empty Re: need this part

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum