immobiliser
Page 1 of 1
immobiliser
What year Gti's came with immobilisers?
I have tried cranking my engine ( installed gti lump now) but it wont spark ?
Also i seem to have one plug left over in the engine bay: two wires one white/blue and another one is blue/yellow?
Any help is great!
I have tried cranking my engine ( installed gti lump now) but it wont spark ?
Also i seem to have one plug left over in the engine bay: two wires one white/blue and another one is blue/yellow?
Any help is great!
daymoon- Posts : 288
Join date : 2009-10-03
Age : 30
Location : Selby, North Yorkshire
Re: immobiliser
no gtis came with immobilisers as far as im aware if it were a optional extra then maybe but cant see it
steve
steve
_________________
Bringing back the old school
STEVEGTI- Admin
- Posts : 1835
Join date : 2008-03-02
Age : 32
Location : london
Character sheet
first car: suzuki swift gti -
Re: immobiliser
post a picture of the plug and what its near 2 pins off te top of my head
injector feed
reverse light
idle speed control valve
need to see it to know though
p.s have the springs arrived yet
injector feed
reverse light
idle speed control valve
need to see it to know though
p.s have the springs arrived yet
_________________
Bringing back the old school
STEVEGTI- Admin
- Posts : 1835
Join date : 2008-03-02
Age : 32
Location : london
Character sheet
first car: suzuki swift gti -
Re: immobiliser
Thanks! That makes out lives easier!
The plug i have is on the right hand side of en engine, come out of same loom branch as reverse switch plug and water temperature sensor..
When i put a fuse in the diagnostics slot in the fuse box, i got loads of errors.. first one was 13 and it kept flashing. is it normal or it should have clean memory and show no errors?
yes the springs arrived. i changed one so far... But i need to get the car running first until i do anything else
The plug i have is on the right hand side of en engine, come out of same loom branch as reverse switch plug and water temperature sensor..
When i put a fuse in the diagnostics slot in the fuse box, i got loads of errors.. first one was 13 and it kept flashing. is it normal or it should have clean memory and show no errors?
yes the springs arrived. i changed one so far... But i need to get the car running first until i do anything else

daymoon- Posts : 288
Join date : 2009-10-03
Age : 30
Location : Selby, North Yorkshire
Re: immobiliser
no the errors are your car it doesent remember them as it hasent had power for however long it was on the shelf so its reset will look at my loom tomorrow to see what that matches with what couler is the plug
steve
steve
_________________
Bringing back the old school
STEVEGTI- Admin
- Posts : 1835
Join date : 2008-03-02
Age : 32
Location : london
Character sheet
first car: suzuki swift gti -
Re: immobiliser
Right-o....
Gonna try some stuff out tomorrow, hopefully get it running tomorrow!
Gonna try some stuff out tomorrow, hopefully get it running tomorrow!
daymoon- Posts : 288
Join date : 2009-10-03
Age : 30
Location : Selby, North Yorkshire
Re: immobiliser
Well.. What do ya know! It starts!
Had a snapped wire on the AFM plug, now that is fixed it starts! Idles well too!
Stilll got one unused plug, and earth problem with cluster... need steering shaft from a gti as i had to use healight/wiper/turn lights controls from gti and now controls font fit over original shaft
Had a snapped wire on the AFM plug, now that is fixed it starts! Idles well too!
Stilll got one unused plug, and earth problem with cluster... need steering shaft from a gti as i had to use healight/wiper/turn lights controls from gti and now controls font fit over original shaft
daymoon- Posts : 288
Join date : 2009-10-03
Age : 30
Location : Selby, North Yorkshire
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|